Ticker

6/recent/ticker-posts

Ad Code

Responsive Advertisement

Success! 1st Martian rock cored by Perseverance

1st Martian rock cored by Perseverance rover - large flat rock with marmorations, with a hole in it, lying on a beige surface with smaller rocks and pebbles.
The rock Rochette with a bore hole clearly visible, from the sampling procedure by the Perseverance rover. The core sample will now be processed, sealed and stored for recovery by a later mission from Earth. Image via NASA/ JPL-Caltech.

1st Martian rock cored for sample return to Earth

NASA’s Perseverance rover has successfully cored a Martian rock, NASA announced late last week. This is Perseverance’s first core sample, and it’s the first Martian rock to be cored. The rover acquired images on September 1, 2021, that showed the sample tube filled with an intact core of the rock. It’s an exciting achievement. And it’s the first of many such samples of Mars rock that’ll be analyzed and stored for return to Earth by a future Mars mission. Wow.

For this accomplishment, the second time’s the charm. Perseverance first attempt at this maneuver was on August 5, 2021. More about that below. This time, the mission team is confident the sample really is in the tube, as seen in initial images. They had a bit of worry about that since subsequent images were a bit less clear. So they took additional images just to be absolutely sure. NASA later tweeted on September 4 that newer images taken did indeed still show the sample safely inside the tube:

Sampling, caching and ‘percuss to ingest’

So how does the sampling work? The rover uses its Sampling and Caching System with a rotary-percussive drill and a hollow coring bit at the end of its 7-foot-long (2-meter-long) robotic arm. This is used to extract samples slightly thicker than a pencil. The sample tube is housed within the bit during coring.

Reddish rocky material inside a circular metal instrument.
This photo, taken on September 1, 2021 from the rover’s Mastcam-Z instrument, shows the intact rock core inside the sample tube. Image via NASA/ JPL-Caltech/ ASU/ MSSS.

The corer, bit, and open end of the sample tube are then imaged by the rover’s Mastcam-Z instrument. After the images showed the sample in the tube, the rover began a procedure called “percuss to ingest.” This vibrates the drill bit and tube for one second, five separate times. It’s done in order to clear the lip of the sample tube of any residual bits of rock or dust that may be present.

If at first you don’t succeed …

The news that the core sampling worked is a relief to the mission team. The first attempt back on August 5, 2021, in a flat pavestone-like rock, didn’t go as planned. The drill and coring bit did obtain a core, but the core was too soft and crumbled into dust and never filled the sample tube properly. It was a disappointing setback, but now this second attempt shows the rover can accomplish its sampling goals as planned.

Jennifer Trosper, project manager at NASA’s Jet Propulsion Laboratory, commented on the successful sample acquisition, saying:

The project got its first cored rock under its belt, and that’s a phenomenal accomplishment. The team determined a location, and selected and cored a viable and scientifically valuable rock. We did what we came to do. We will work through this small hiccup with the lighting conditions in the images and remain encouraged that there is sample in this tube.

Flat reddish rock with hole drilled into it and debris around the hole.
The first coring attempt, in a flat pavestone-like rock, didn’t go as planned. The rock sample crumbled before it could be stored in the sample tube. Image via NASA/ JPL-Caltech.
Smiling woman in white lab jacket with instruments behind her.
Jennifer Trosper is the Perseverance project manager at NASA’s Jet Propulsion Laboratory. Image via NASA.

The search for life

Perseverance’s primary science mission is to search for evidence of ancient microbial life. It’s landing site, Jezero Crater, was once a large lake a few billion years ago. There is even a river delta, still clearly visible on the crater floor, where a river used to empty into the lake. The rover landed not far from the delta, and will be exploring it in the relatively near future.

Jezero Crater contains ancient lakebed sediments and clays, and is a prime region in which to look for traces of microbial biosignatures or fossils. The months and years ahead will be interesting, indeed.

The rover made its jaw-dropping landing on Mars on February 18, 2021.

Bottom line: NASA’s Perseverance rover has successfully cored its first rock on Mars. The good news comes after an earlier attempt failed in early August. The core sample will be stored onboard the rover for later return to Earth by a future mission.

Via Jet Propulsion Laboratory

The post Success! 1st Martian rock cored by Perseverance first appeared on EarthSky.

Enregistrer un commentaire

0 Commentaires